Running dd if=/dev/sda of=/dev/md126 is taking some time so it seems like it's working but I am not sure what else may need to be done after to make the system bootable.
When trying to mount /dev/md126 it says: wrong fs type, bad option, bad superblock on /dev/md126, missing codepage or elper program, or other error.
/dev/sda is the source drive (256GB SSD)
/dev/md126 is the target drive (512GB SSD RAID 1) - setup using bios/motherboard RAID controller. So fake RAID I believe.
Tried using Clonezilla but it didn't detect the /dev/md126 device, just the individual drives (sdb/sdc).
Do I need to edit /etc/fstab on target disk and set up grub after? What commands are necessary?
