4

I have a 15-inch 2.53ghz mid-2009 macbook pro (in some places known as "macbookpro 5.4"). I wanted to dual boot mac os x with ubuntu 14.04 desktop 64-bit, so I set up a secondary partition using disk utility (not bootcamp assistant as it wants a windows 7 disk). I rebooted, booted from the ubuntu dvd I burned (there are two options in the boot menu, the EFI version called "EFI boot" and the BIOS version misleadingly called "windows," I chose the EFI one), and first thing I do is check disk for defects, and there aren't any. So I reboot and start up the installer, but the Ubuntu splash screen comes up garbled and it stays there forever. (I've waited 2 hours, I don't think the live cd is supposed to take that long to start). So I noticed there was something wrong.

One potential solution I found was installing refit on the mac os x partition. So I did. I started up the efi boot loader from the Ubuntu disk using refit instead of holding down option on startup (needed to refresh a couple times for refit to see the dvd), same result. Another solution was booting with nomodeset. This time it didn't get stuck at the splash screen, but a completely black screen (no blinking cursor either) after being at the boot screen for a while. It could be a video driver problem, but how, if I've booted with nomodeset?

I've also tried the "64-bit mac" version that they offer on the download page. That version doesn't have an efi version, only bios, but it boots exactly the same way (either stuck on the boot screen or a black screen).

I don't want to try the 32-bit version as it could be much slower and also won't recognize my full 8gb of ram. (edit: tried it, still boots to a black screen)

4/23 update: After commenting the answers I got, I should mention that on my macbook pro I have downgraded the efi firmware from 1.7 to 1.6 because I replaced the hard drive myself (the original one died), and the 1.7 update makes hard drives you replaced yourself become so slow they're unusable because they're "unsupported". For this reason I also can't install anything newer than mac os x mountain lion 10.8.3 on my mac, even if it would work normally (it would throw looping errors similar to the ones I mentioned in a comment), in fact I'm stuck on lion 10.7.5. The solution I found on the internet about this only works for seagate hard drives, and I have a western digital.

If I upgrade the efi firmware again, I could finally install Ubuntu, but it would be slowed down to a crawl (random hangs every 10 seconds or so), so it's not worth it. I'd rather just buy a new $300 non-apple laptop and put Ubuntu there. Thanks everyone who answered, but I'm open to trying something else to get it to work, if anyone has a potential solution.

2017 update: I bought a newer computer, but I kept this older macbook as a secondary one. To make it faster, I replaced the hard drive again, this time to a SanDisk SSD plus, and despite it still being unsupported by Apple, it works perfectly with the old 1.6 EFI firmware. Not only does Ubuntu work fine, but so do newer Mac OS versions (up to 10.11 El Capitan officially, even 10.12 Sierra if you use dosdude1's patch). The old Apple EFI firmware caps the SATA speed at 1.5 Gbit/s, but with a solid state drive this computer works very quickly, so I won't attempt updating it.

dick
  • 101

6 Answers6

1

Have you tried replacing or pulling/pushing/checking the HDD cable? It's a common failure in macbooks from around 2009. I've had 3 macbooks with this failure in my company (and there is not so much macbook there...) The problem is exactly the same as you describe. Computer way sloooow, and some hangs. Ata errors also, due to timeouts in bus.

The easiest way to make sure if this is the problem is putting your internal HDD in an USB enclosure and boot. If computer is faster through USB (reasonabily faster) than through ATA, you found it. You have then to replace your internal ATA cable (try cleaning and reconecting first). ebay could be your friend here as it's not very cheap...

About your problems due to WD disk instead of Seagate... I've never had any problem replacing macbook disks with any particular brand. In fact I'm used to buy WD and hitachi because they seemed to me that they last for long (But I've used samsung, toshiba...)

Anton
  • 11
0

I recommend adding Refit as it suggested. I have never found a workaround to using refit when dualbooting a macintosh computer. Install refit on your computer and restart the installation process.

I recommend inserting the disk and then shutting down. Upon booting hold the option key and you should be able to select the ubuntu disk image. Install as usual but make sure to do the proper partitioning. I can link you if necessary to the instructions for partitions (it has been a while since i used a mac).

Let me know where that gets you (sorry I don't have the reputation to only commment, so I will try to guide you through the process)

Rotblatt
  • 16
0

Unfortunately, Apple seems to delight in making changes to particular Mac models that require completely changing everything one needs to do to install anything but OS X on the computer. Chances are it's such model-specific issues that are causing you problems. You might have some luck with a Web search on "Ubuntu" and some variant of your model number. When I did this, I found these instructions -- but they apply to Ubuntu 10.04, so they may not be relevant for 14.04.

Your symptoms are also quite similar to ones reported on many recent PCs. There's a huge question/answer set on this site devoted to this problem, so it's worth checking that out.

In some cases, it's necessary to install in BIOS mode to work around this type of problem, but I'd try sticking with an EFI-mode installation initially. This will enable you to avoid using the flaky and dangerous hybrid MBR that's required for a BIOS-mode boot on a Mac.

Community
  • 1
Rod Smith
  • 45,120
  • 7
  • 66
  • 108
0

I got the Ubuntu 14.04 installed on my Macbook Pro Mid 2009 (13").

What I did:

  • Installed a rEFInd (http://www.rodsbooks.com/refind/using.html);
  • Downloaded a Ubuntu 14.04 ISO (Normal 64bits ISO, not the +mac) and did a bootable usb drive;
  • Boot up the Mac, selected the usb (at the rEFInd screen), and started the installation.

I think the problem is in the ISO with +mac.

Manisha
  • 93
marksabbath
  • 1
0

I was able to get 14.04 LTR installed on my Macbook Pro 5,3 last night. A few days ago I installed 12.04.4 LTR (64-bit Mac (AMD64) desktop CD) because I knew it would be fully supported. I did it from a USB drive using this method. In my case I didn't have an OSX installation so I booted an OSX Lion install disk and used the terminal there to convert and copy the Ubuntu installation to the USB drive as described in that guide. After having everything up and running I seen this guide on upgrading to 14.04 and decided to give it a whirl and to my surprise it actually worked. Hope this might help you in some way.

Mike
  • 1
0

Look for the usb repair tool from osx, can't remember the exactly, but you should find it. Erase the disk, and then install mavericks from appstore. (download).

That way i got mavericks on my 2009 whitemacbook 5,2.

Maybe from the repair tool (disk repair?) you can make new partitions easier, and make one for ubuntu. Perhaps bios is the right version to boot? not sure

user229948
  • 1