Arduino Stack Exchange
Arduino Stack Exchange

Most Popular

more tags
1500 questions
4
votes
2 answers

How to change the I2C address of the AS5048B?

I saw this video from James Bruton. See the links to the GitHub repos in the video description. I bought a few AS5048B boards from AMS, so I can measure the position of my stepper motors. In the sosandroid repo, I ran program_address and was able to…
John Doe
  • 151
  • 5
4
votes
1 answer

Bad readings from 12V pwm fan tachometer signal

I have the following circuit: (The Arduino is powered via the USB) The problem is that I the reading from the fan's tachometer signal are incorrect, I tried to add the two resistors as voltage dividers but still the readings are wrong. When I check…
Takata
  • 89
  • 4
4
votes
2 answers

Arduino resets or stuck during run, only when DC motors are connected

I'm using an arduino connected to 2 DC motors through L298N. the arduino is powered by a 9V battery, and the L298N is powered by 4 AA batteries. there's also a switch that starts the movement. I've added print statements to debug, one in the setup,…
young marx
  • 151
  • 3
4
votes
2 answers

STM32 "black pill" won't enter DFU mode reliably

I'm following the standard process to put an STM32 "black pill" (STM32F401CC) into DFU mode so that I can upload from the Arduino IDE over USB: Hold down boot0. Press and release rst. Release boot0. When the board is not in a circuit this works…
NeilenMarais
  • 219
  • 3
  • 8
4
votes
1 answer

I²C between ATTiny85 (8MHz) and Arduino Uno

I keep receiving the following error in myATTiny85-Slave code below: sketch_mar12a.ino: In function 'void setup()': sketch_mar12a:19: error: 'class USI_TWI_S' has no member named 'onRequest' I have downloaded TinyWireS and TinyWireS.h clearly has…
lucidgold
  • 233
  • 1
  • 3
  • 9
4
votes
2 answers

Why is the constrain function used after the map function?

I am reading some sample code and they use this method of mapping data from IR sensors: sensor1 = analogRead(0); adj_1 = map(sensor1, s1_min, s1_max, 0, 255); adj_1 = constrain(adj_1, 0, 255); What is the point of using constrain here if…
Michael Rader
  • 326
  • 2
  • 5
  • 17
4
votes
1 answer

ESP32 can not deep sleep longer than 35 minutes

I'm trying to get my Lilygo T5 4.7" epaper to deep sleep for 12 hours. But I only seem to be able to get about half an hour (2100s) of deepsleep on it. If I set the timer for longer, it just reboots right away. #include #include…
Engberg
  • 43
  • 1
  • 4
4
votes
2 answers

Is it possible to use multiple I2C sensors with Arduino without an I2C multiplexer?

I have an IMU sensor and a Bluerobotics temperature sensor, both have different I2C addresses. I want to integrate both with an Arduino UNO, I know I can do this with an I2C multiplexer but I don't have access to one right now. Is it possible to…
ssmalik
  • 49
  • 2
4
votes
2 answers

How to cut down size of imported DigiKeyboard library

I'm working on a project with a Digispark ATTiny85, that performs keystrokes using the DigisparkKeyboard library (https://github.com/digistump/DigisparkArduinoIntegration/tree/master/libraries/DigisparkKeyboard). Besides the DigiKeyboard, I also…
emma.makes
  • 105
  • 6
4
votes
1 answer

How do I escape a boot loop?

Note: This is a reference question (but feel free to write answers of your own!) I uploaded code that contains a bug that causes my Arduino to immediately reset itself when starting using this code from the AVR libc FAQ. The built-in LED keeps…
glibg10b
  • 317
  • 1
  • 7
4
votes
1 answer

ISR for very fast processes, strange code found. Has ISR effect on timer behaviour?

I found the following code within an example for performing very fast changes on a PWM-output. It works, however I'm wondering about some details. TIMER2 was set up in setup() as follows: TCCR2A = 0; // We need no options in control…
Ariser
  • 577
  • 1
  • 8
  • 25
4
votes
1 answer

Can not burn arduino pro mini 8 MHz bootloader with usbasp

I am using schematic of Arduino Pro mini 3.3v/8 MHz version. Please see below circuit diagram I built. Power supply to circuit is 3.3V. I have a USB ASP programmer which I used in previous version of same circuit running at 5V/16MHz. It was working…
adeel asif
  • 61
  • 2
4
votes
2 answers

How to program ATTiny85 running 3.3V

I have a working project built around ATTiny85 on a breadboard running at 5V. Now I want to move this prototype on a PCB where it will be powered from batteries. All components used are capable of running 3.3V so I want to run the ATTiny85 at 3.3V…
jnovacho
  • 235
  • 1
  • 3
  • 7
4
votes
1 answer

Ubuntu Serial Port Briefly showing on arduino IDE

I am using a NodeMcu with Arduino IDE on Ubuntu. I have managed to upload the blink script and it work. Now, when i plug the nodemcu, the serial port /dev/ttyUSB0 is briefly available in the IDE. After 2 seconds, the port menu is grayed out again…
Justin Mayer
  • 43
  • 4
4
votes
2 answers

My ESP32-S3 DevkitC-1 has two USB micro ports labeled 'USB' and 'UART'. What are they for?

I'm new to micro-controllers. I've got an ESP32-S3-DevKitC-1 and I'm trying to do a simple hello world with the Serial. I'm using the Arduino IDE for flashing and serial monitoring. My code is: /** * As simple as it gets, right? Setup the Serial,…
Spina
  • 139
  • 1
  • 5
1 2 3
…
99 100