Most Popular

1500 questions
7
votes
1 answer

Hooking up LCD screens reclaimed from old camcorders to Arduino

Has anyone had any luck using LCD screens reclaimed from old electronics with Arduino, such as camcorders etc? My 8 yr old has an old sony handycam (dcr-trv103) in bits and now wants to use the LCD screen with the arduino. I'm not even sure how I…
Agent Zebra
  • 211
  • 3
  • 9
7
votes
2 answers

Storage usage of methods compared to copied code

When you have really small snippets of code that are repeated several times in your micro controller program, is it better to write a method? I mean better in terms of performance and storage usage. I know that when programming for PC, code…
Lehue
  • 193
  • 6
7
votes
9 answers

How to eliminate noise from PWM controlled 12V fan at low speed

I am trying to build a simple fan controller (single fan). So far I have successfully created a circuit which powers the fan with an external 12v DC adapter and added a transistor (NPN) to switch it on and off. The transistor is connected to a PWM…
Fieg
  • 173
  • 1
  • 1
  • 7
7
votes
7 answers

Fluctuating readings of LM35 temperature sensor (+- 5°C) with Arduino UNO

I am trying to read a LM35 temperature sensor with Arduino UNO which I got as a gift. The issue is the fact, that my readings of sensor are, well, suspicious at least - they jump with each reading some 5 °C up or down. I had used several posts how…
Rao
  • 179
  • 1
  • 3
7
votes
2 answers

Are all Arduino shields compatible with all Arduino boards?

Are all Arduino shields compatible with all Arduino boards? Like is the Wi-Fi one compatible with the Arduino Nano & Micro as well as the Uno, etc., or do I need to be careful when buying shields that they'll be compatible with my board? Also, the…
alice fey
  • 73
  • 1
  • 3
7
votes
5 answers

Can I have backup power for an Arduino device?

I have an arduino project that will work while plugged into a generic outlet. But I want to connect a battery in case the power goes out. I know there are various power sources (coin cell, polymer lithium, 9V, etc.). But if I code my project to use…
SnowboardBruin
  • 187
  • 1
  • 2
  • 8
7
votes
3 answers

Advisability of Using Bit Fields in Structs

I have to track a large amount of data (for an Arduino) in a program while taking care of a fair amount of other business. I started with a struct like this: struct MyStruct { // note: these names might as well be foo bar baz uint8_t color; …
anthropomo
  • 173
  • 1
  • 6
7
votes
3 answers

Multiple SPI device

I want to connect Ethernet board (W5100 HR911105A) to Arduino Leonardo with SPI and I also want to connect SD reader. When I test these boards separately everything working. But when I connect them on the same board the program fails at…
eszik.k
  • 121
  • 5
7
votes
1 answer

Can I change font Color and/or Type for IDE 1.5.6r2?

The program becomes harder to read (at least on my particular monitor) after upgrading. Any way to change font Color to darker color and/or Type to thicker stroke (like B in this question editor) for IDE 1.5.6r2?
EEd
  • 904
  • 1
  • 13
  • 21
7
votes
1 answer

Accessing a C++ static variable from gcc inline asm

For some reason I want to mix a bit of assembly with C++ (not C). To allow the code to be compilable using the standard Arduino IDE, I don't want to use direct assembly source. I don't want to use a wrapper C file either. My problem is as follows: I…
kuroi neko
  • 183
  • 6
7
votes
1 answer

From transfer function to arduino

This question might seem stupid, but I have been curious about it for a long time. So I am a new engineering student, and we learned a lot about "designing a controller". For example, design controller for a car steering system and so on. All the…
MechAvia
  • 171
  • 1
  • 1
  • 2
7
votes
2 answers

Analog Reference and Power Voltage

On the Arduino website it states that the analog pins read voltages from 0 to 5 volts (default) and return a value from 0 to 1023. One can also set the range with analogReference(). However, this is probably assuming the Arduino is running at 5…
user3933
7
votes
2 answers

What is actually an IC (Integrated Circuit)?

They say that you must know what IC your board has before loading a new program from the Arduino IDE and that the information is available on the top of the IC, but where is it exactly and what is an IC?
SpaceMonk
  • 353
  • 2
  • 4
  • 8
7
votes
3 answers

Can you charge and use a Li-po battery at the same time?

I have a system that uses an Arduino Uno board as a "brain". All the elements in the system are powered by a single Li-po battery (3-cell, 11.1 V, 1800 mAh). I made a circuit so the Arduino can check the battery voltage and decide when it needs to…
Miguel
  • 118
  • 1
  • 2
  • 8
7
votes
1 answer

Arduino as a real device to computer

Suppose we have a computer mouse , now when we connect it to a computer then computer understands it is a mouse which is been connected to it. Same thing happens for keyboard and many other devices. As per my understanding, the mouse has a…